OMRAR / SOLUTION LAYER
Altyapı

Network and Cabinet Installation

We install networks, rack cabinets, switches, Cat6 structured cabling and fibre links, from survey to handover, fully labelled and documented.

Network installation means planning and building the wired infrastructure and active equipment (switches, routers, cabinets) that lets a company's computers, printers, servers, IP cameras, phones and production devices communicate reliably and quickly. At OMRAR SOFTWARE LTD we design, pull, label and document the whole chain in one hand: network setup, rack cabinet installation, switch configuration, structured cabling, Cat6 cabling and fibre links. We serve businesses across Turkey on site and remotely, and we manage the IT and infrastructure of more than 80 companies.

A well-built network goes unnoticed. A badly built one reminds you every day: dropped connections, slow file access, tangled cables and panels where nobody knows which wall socket goes to which port. Here is how we approach network infrastructure and what shapes the price.

Who is it for?

  • Businesses opening a new office, factory, warehouse, shop or clinic that need the network built from scratch,
  • Companies whose network has grown "organically" over the years and needs to be cleaned up,
  • Firms moving premises or adding a floor that need new cabling,
  • Teams preparing for cameras, access control, VoIP phones or Wi-Fi access points,
  • IT managers who want their cabinet tidied, labelled and documented.

Problems we solve

  • PCs and printers that freeze or drop off the network every week,
  • Slow file-server access that is often caused by bad cables or a looping switch, not the server,
  • Cabinets so tangled that tracing one line takes hours,
  • Accounting, production and guest traffic mixed on one flat network,
  • Cat5e or poor-quality cabling that cannot sustain gigabit speeds,
  • Long or building-to-building links where copper is not enough.

Scope of work

  • Structured cabling: Cat6 and Cat6A runs, trunking and cable tray, socket and patch panel termination, with every line tested.
  • Fibre optic links: Single-mode or multi-mode fibre for building backbones and links between buildings, fusion splicing and SFP selection.
  • Rack cabinet installation: Wall or floor cabinets, ventilation, patch panel and switch layout, cable management, power distribution and UPS connection.
  • Switch configuration: VLANs, trunks, port security, PoE budget, loop protection and redundant uplinks.
  • Segmentation: Separate VLANs for office, servers, cameras, phones, guests and production devices.
  • Labelling and documentation: Consistent labels, a line list, a cabinet layout and a network diagram.
  • Cleaning up existing networks: Re-ordering old cabinets, removing dead lines and diagnosing speed and stability issues.

Our technical approach

We never pull cable without a site survey. We look at ceiling voids, cable routes, where the cabinet will sit, heat and dust, and how close the electrical panel is. Copper runs are limited to 90 metres, so a distant point gets a second distribution point or fibre.

We follow ANSI/TIA and ISO/IEC structured cabling practice: respecting bend radius, keeping data away from power cables, terminating carefully, and testing every line. Results go into a report rather than a "the light is on" handover.

We leave room to grow: spare rack units, spare patch ports and free space on the tray. Switch choice is based on PoE power, uplink speed, manageability and vendor support, not only port count. We work with common brands such as Cisco, Aruba, Ubiquiti, MikroTik and TP-Link, and we are a Huawei and DrayTek partner. At handover you receive photos, the line list, the VLAN plan and device management details, so the network belongs to you.

Our process

  1. Survey and analysis: We inspect the site and ask about device count, usage and growth.
  2. Quote and design: A written plan with routes, cabinet layout, equipment list and schedule.
  3. Installation: Cabling, termination, cabinet assembly and switch configuration, ideally outside working hours.
  4. Testing and handover: Every line measured, the network load-tested and documentation delivered.
  5. Maintenance and support: Later changes and faults handled through IT support and maintenance.

What determines the price?

The main factors are the number of points and cable distances, cable category and fibre needs, how difficult the route is (suspended ceilings, concrete, outdoors), cabinet size and equipment list, switch features, whether work happens in a live office, and the scope of testing and documentation. We quote itemised pricing after a survey.

Our projects

See also Wi-Fi installation, IP camera systems and firewall setup.

Frequently Asked Questions

Cat6 or Cat6A?

Cat6 is enough for most offices at 1 Gbit/s. Choose Cat6A for 10 Gbit/s over longer runs, heavy PoE use or long-term investment; it is thicker and costs more.

When is fibre needed?

For runs over 90 metres, links between buildings, electrically noisy production areas, or a high-speed backbone between cabinets.

Can you work without stopping the office?

Largely yes. Cabling and cabinet preparation happen outside working hours, with a short, planned window for the cut-over.

Can you rework my existing cabinet?

Yes. We remove, sort, re-order, label and document what is there. Sometimes tidying is enough and replacement is unnecessary.

What documents do I receive?

The line list and label scheme, cabinet photos and layout, VLAN and IP plan, device management details and line test reports.

Do you maintain the network afterwards?

If you wish: firmware updates, fault response and change requests under ongoing support.

Let's plan your network

If you have a new office, a network to tidy or a growth plan, contact us for a survey. Request a quote.

Cookie Preferences
Choose which cookie categories to allow

Under the Turkish Personal Data Protection Law (KVKK, Law No. 6698) and GDPR, you can consent to each cookie category separately. Your preference is stored in your browser for 12 months.

Essential Cookies Required
Required for core functions such as sessions, security (Turnstile) and form submissions. These cannot be disabled.
Analytics Cookies
Anonymous statistics such as visitor counts, page views and device information help us improve the website.
Marketing Cookies
Used for interest-based advertising, remarketing and social media sharing. These are not currently in active use.